
( Brand: Hp ), ( California Prop 65 Warning: Warning ), ( Manufacturer Part Number: 780978 001 ), ( Type: Backplane )
The HP DL380p Gen9 Small Form Factor (SFF) Bay SFF NVMe Backplane Power Cables (HP Part Number 780978-001) are designed specifically for use with HP DL380p Gen9 servers equipped with NVMe drives in the SFF backplane. These power cables provide the necessary connections to deliver power to the NVMe drives, ensuring optimal performance and reliable operation.
Each power cable is approximately 12 inches (30.5 cm) in length, with a SFF connector on one end and two 6-pin SFF power connectors on the other end. The SFF connector plugs into the backplane power distribution panel, while the two 6-pin SFF connectors plug into the power supply of the HP DL380p Gen9 server. The cables are made from high-quality materials, ensuring durability and reliability in a data center environment.
The HP DL380p Gen9 Bay SFF NVMe Backplane Power Cables are hot-plug capable, allowing for the NVMe drives to be installed or removed while the server is still running, reducing downtime and improving productivity. The cables are also designed to be EMI/EMC compliant, ensuring minimal electromagnetic interference and radio frequency interference.
These power cables are an essential component for any HP DL380p Gen9 server configuration that utilizes NVMe drives in the SFF backplane. They offer a streamlined and efficient way to deliver power to the drives, enabling maximum performance and reliability. With their robust design and hot-plug capability, these power cables are a valuable investment for data center operators and IT professionals seeking to optimize their server infrastructure.
HP DL380p Gen9 servers support SFF (Small Form Factor) NVMe drives through the use of a dedicated backplane. The HP 780978 001 DL380 Gen9 Bay SFF NVMe Backplane Power Cables are an essential component for powering these NVMe drives. Here are some pros and cons of purchasing these power cables:
Pros:1. Designed specifically for HP DL380p Gen9 servers, ensuring compatibility and reliability.
2. Allows the use of SFF NVMe drives, which offer faster data transfer rates and lower latency compared to traditional HDDs or SSDs.
3. Provides power to each NVMe drive, enabling their operation within the server.
4. Helps reduce clutter and simplify cabling within the server rack, as each NVMe drive requires only a single power connector.
Cons:1. Can only be used with HP DL380p Gen9 servers that support SFF NVMe drives and have a compatible backplane.
2. Requires an additional investment in SFF NVMe drives, which may be more expensive than traditional HDDs or SSDs.
3. Since these power cables are specific to HP servers, they may not be as widely available or as cost-effective as generic power cables.
In conclusion, the HP 780978 001 DL380 Gen9 Bay SFF NVMe Backplane Power Cables are a necessary investment for those using HP DL380p Gen9 servers with SFF NVMe drives. They offer the benefits of faster data transfer rates, lower latency, and simplified cabling. However, they come with the added cost of the NVMe drives themselves and may not be as widely available or cost-effective as generic power cables.
Recommendation:If you are using or planning to use an HP DL380p Gen9 server with SFF NVMe drives, it is strongly recommended to purchase the HP 780978 001 DL380 Gen9 Bay SFF NVMe Backplane Power Cables to ensure proper power delivery and reliable operation of your NVMe drives.
Supports up to six NVMe SIDS for high performance storage. Full cable set data power. Included Cables:: All required NVMe data cables. Replaces Part Numbers: 779313 001, 768950 726552 B21.
Compatibility: HPE Pliant DL380 Gen9, DL560 Gen9. Features:: Genuine HPE OEM 6 Bay NVMe backplane assembly. Drive Support: 6 SFF 2.5 NVMe SIDS. Fully tested and validated per HPE specifications.
Orders must be prepaid before or at time of pickup. NVMe power cable.